CFD - Computational Fluid Dynamics

CFD  > CFD Applications  > Fluidised Beds, Risers and Gasifiers  > Model of Three Tuyeres

Thickeners, Feedwells and Slurry Flows

Cyclones, Particle Separation and Coal Processing

Gas-Liquid and Liquid-Liquid Systems

Rotary Dryers, Boilers, Kilns and Ovens

Hoods, Ducts and Buildings

Mixing Vessels, Stirred Tanks and Flotation Cells

Fluidised Beds, Risers and Gasifiers

Flash and Bath Smelting

Flow through and over Solid Media

Burners


Model of Three Tuyeres

A two-dimensional bottom blown fluidised bed system was modelled using CFD. The outer tuyeres inject air into the bed while the centre tuyere feeds natural gas for in bed combustion. On the right is a video of the laboratory physical model of the system. CFD was used, with physical modelling, to understanding the mixing between the central gas and side air tuyeres.

If the animation does not load or is of poor quality, try running this compiled Smacker file: f2.exe (1.0MB).

Note that this is an executable file, and should be suitable for all PCs running Win95 or later. For more information about Smacker and its compiled executables, please follow this link.

 

Copyright © 2001-2015 CSIRO, All Rights Reserved