CFD Online - Computational Fluid Dynamics

CFD Online > Publications by the CSIRO Minerals Fluid Modelling Group > List of Publications: Fluidised Beds, Risers and Gasifiers

Go to Index by Year

Go to Author Index

Thickeners, Feedwells and Slurry Flows

Cyclones, Particle Separation and Coal Processing

Gas-Liquid and Liquid-Liquid Systems

Rotary Dryers, Boilers, Kilns and Ovens

Hoods, Ducts and Buildings

Mixing Vessels, Stirred Tanks and Flotation Cells

Fluidised Beds, Risers and Gasifiers

Flash and Bath Smelting

Flow through and over Solid Media

Burners

Experimental Techniques


List of Publications: Fluidised Beds, Risers and Gasifiers

View animated examples here.

Discrete particle simulation of size segregation of particle mixtures in a gas fluidized bed
YQ Feng, AB Yu
The 8th International Conference on Circulating Fluidized Beds, May 10-13, Hangzhou, China, 2005.
Tube erosion modelling in a fluidised bed
D Achim, AK Easton, MP Schwarz, PJ Witt, A Zakhari
Appl. Math. Modelling. Vol 26, No 2, pp. 191-201, 2002
Abstract (external link) | Full Paper (external link)
Modelling and comparison of solids RTDs from CFB and other processes
KS Lim, JPK Peeler, MP Schwarz
7th International Conference on Circulating Fluidized Beds, Niagara Falls, Canada, May 5-8, 2002
Using Electrical Capacitance Tomography to monitor gas voids in a packed bed of solids
RB White
Meas. Sci. Technol., 13, pp 1842 –1847, 2002
Mixing of two Solid Materials in a Bubbling Gas-Solid Fluidised Bed
RA Bell, PJ Witt, JA Naser, AK Easton
6th World Congress of Chemical Engineering, Melbourne, 23-27 September, 2001
Comparison of Physical and Numerical Modeling of Solids Movement Near the Distributor in a Fluidised Bed Calciner
M Manickam, PJ Witt, RB White, A Zakhari
Proceedings of the Second International Conference on CFD in the Minerals and Process Industries, CSIRO, 6-8 December, Melbourne, Australia, pp. 101-106, 1999
Full Paper
Erosion Modelling in a Fluidised Bed
D Achim, AE Easton, MP Schwarz, PJ Witt, A Zakhari
Circulating Fluidised Bed Technology VI, Proceedings of 6th International Conference on Circulating Fluidized Beds, Wurzburg, Germany, pp.959-964, 1999
Computational and Experimental Studies of Tube Erosion in a Fluidised Bed
D Achim, AE Easton, MP Schwarz, PJ Witt, A Zakhari
Proceedings of the Second International Conference on CFD in the Minerals and Process Industries, CSIRO, 6-8 December, Melbourne, Australia, pp. 89-94, 1999
Characterisation of flow regimes in the base of a CFB riser
RB White, A Zakhari
CFB6, (1999, Germany)
Internal structures in fluid beds of different scales: An application of electrical capacitance tomography
RB White, A Zakhari
1st World Congress on Industrial Process Tomography, (1999, Buxton, UK), 39 – 46
Simulation of Fluidised Bed Systems using Computational Fluid Dynamics Modelling
PJ Witt
Proceedings of Control of Particulate Processes VI, Fraser Island, Queensland Australia, 19-24 September 1999
Application of CFD to Industrial fluidised bed processes
PJ Witt, LJ Mittoni, MP Schwarz
Circulating Fluidised Bed Technology VI, Proceedings of 6th International Conference on Circulating Fluidized Beds, Wurzburg, Germany, pp. 211-212, 1999
Physical and Numerical Modelling of Solids movement near the Distributor in a Fluidised Bed Calciner
RB White, PJ Witt, A Zakhari, M Manickam
Proceedings of the 6th International Conference on Circulating Fluidized Beds, CFB-6, 22 - 27 August, 1999, Würzburg, Germany, (Editor J. Werther), 225-230
Lateral mixing in a 1.56m. diameter cold fluid bed model
RB White, A Zakhari
Fluidisation 9, (1998: Colorado), 349-356
Physical and Numerical Modelling of the Distributor system in a fluidized bed calciner
RB White, PJ Witt, A Zakhari, M Manickam, R Close, MP Schwarz,
Proceedings of CHEMECA 98, The 26th Australasian Chemical Engineering Conference, Port Douglas, Sept 1998
A Numerical Model for Predicting Bubble Formation in a 3D Fluidized Bed
PJ Witt, JH Perry, MP Schwarz
Applied Mathematical Modelling, Vol. 22 (12), pp. 1071-1080 (1998)
Abstract (external link) | Full Paper (external link)
Application of CFD to Fluidized Bed Systems
PJ Witt, JH Perry, MP Schwarz
Proceedings of the International Conference on CFD in Minerals and Metals Processing and Power Generation, CSIRO Minerals, pp 353-360, 1997
Full Paper
Comparison of Representations for Particle-Particle Interactions in a Gas-Solid Fluidized Bed
RA Bell, PJ Witt, AK Easton, MP Schwarz
Proceedings of the International Conference on CFD in Minerals and Metals Processing and Power Generation, CSIRO Minerals, pp 360-368, 1997
Full Paper
A Hydrodynamic Model of Gas-Particle flow in a lean Circulating Fluidized Bed Combustor Riser
D Shoesmith, PJ Witt, MP Schwarz
Proceedings of the Australian Combustion Institute: Flamedays 97, pp. 189-193, 1997
Physical and Numerical Modelling of the Distributor System in a Fluidised Bed Calciner
RB White, PJ Witt, A Zakhari, M Manickam, R Close, MP Schwarz,
The 1997 Australian Symposium on Combustion and The Fifth Australian Flame Days, Sydney, Australia, 1997
Mathematical modelling of erosion in a three dimensional fluidized bed
DD Achim, AK Easton, JH Perry, MP Schwarz
In Proceedings of the 2nd Australian Engineering Mathematics Conference 96, 1996
Erosion Modelling in a Fluidised Bed Combustor
DD Achim, AK Easton, JH Perry, MP Schwarz
Proceedings of the 3rd CFX International Users Conference, (AEA Technology), pp. 165-169, 1996
Mathematical Modelling of Erosion in a Three Dimensional Fluidised Bed
DD Achim, AK Easton, JH Perry, MP Schwarz
Proceedings of the 2nd Biennial Australian Engineering Mathematics Conference, (University of Sydney), pp. 281-286, 1996
Two dimensional modelling of multiphase flows in fluidized beds
RA Spencer, PJ Witt, AK Easton, MP Schwarz
In Proceedings of the 2nd Australian Engineering Mathematics Conference 96, 1996
The characterisation of dense-phase fluidisation using capacitance topographic imaging
RB White
5th International Conference on CFB, Preprints , (May 1928-June 1996: Beijing, China). 6 p
Observing dense phase fluidisation using capacitance tomographic imaging
RB White
Chemeca 96, (September 1930-October 1996: Sydney, NSW), 51-56
CFD Modelling of Fluidized Bed Systems
PJ Witt, JH Perry, MP Schwarz
Proceedings of the 3rd CFX International Users Conference, (AEA Technology), pp. 115-116, 1996
Mathematical modelling of erosion in a fluidized bed
DD Achim, AK Easton, JH Perry, MP Schwarz
In Proceedings of the 12th Australasian Fluid Mechanics Conference, 1995
The effect of CFB scale-up on gas-solid contact efficiency
RJ Dry, RB White, RC Close, T Joyce
8th Fluidization Conference, (May 1995: France)
Prediction of the Hydrodynamic Behaviour and Outlet Gas Composition of a Fluidised Bed Coal Fired Gasifier
PJ Witt, JH Perry
Proceedings of Australian Symposium on Combustion including 4th Australian Flame Days, Adelaide, A6-1, November 9-10, 1995
A Study in Multiphase Modelling of Fluidised Beds
PJ Witt, JH Perry
CTAC95, Proceedings of Computational Techniques and Applications: CTAC95, July 3-5, 1995, R. May & A. Easton Eds., World Scientific, 787-794, 1996
Correlation of solids circulation rate in circulating fluidized bed systems
RJ Dry, RB White, T Joyce
4th International Conference on Fluidized Beds, Editor.A. Avidan, New Jersey, pp. 621-627, 1994
Application of Multiphase Modelling to the Hydrodynamics in Circulating Fluidised Beds
PJ Witt, JH Perry
Proceedings of The 2nd CFDS International User Conference, Hilton Hotel, Pittsburgh, USA, 5-9 December 1994
Validation of Mathematical Model for the Prediction of Heat Transfer Coefficients in a Fluidised Bed
PJ Witt, JH Perry
The Role of Mathematics in Modern Engineering, Proceedings of Australian Engineering Mathematics Conference July 11-13, 1994, A. Easton & J. Steiner Eds., Student Litteratar, 311-321, 1996
Incremental heat transfer number in the entry region of circular tubes
TV Nguyen
Int. J. Heat Mass Trans., Vol. 36, No. 14, pp. 3659-3662, 1993
Abstract (external link)
Relation between combustion efficiency and coal rank in fluidized bed combustors
JPK Peeler, GL Lane
Fuel, 72(6), pp. 737-742, 1993
The Fluidized Bed Combustion of Industrial Wastes in Water-Based Slurry Form
JPK Peeler, GL Lane
Proceedings of the 12th International Conference on Fluidized Bed Combustion, pp. 729-734, 1993
Some Preliminary Studies in the Mathematical Modelling of Fluidized Bed Combustors
PJ Witt, JH Perry
Proceedings of Australian Symposium on Combustion including 3rd Australian Flame Days, Newcastle, November 1-2, 1993, A5-2, 1993
The effect of gas inlet geometry on gas-solid contact efficiency in a circulating fluidized bed
RJ Dry, RB White, RC Close
In Fluidization VII, (May 1992: Gold Coast, Qld), 211-218
Fluidized bed combustion. Devolatilisation of large coal particles
JPK Peeler, HJ Poynton, GL Lane, S Ahmed
Proceedings of the 11th International Conference on Fluidized Bed Combustion, 21- 24 Apr 1991, Montreal, Canada, ASME, New York, pp.1-6
 

 

Copyright © 2001-2015 CSIRO , All Rights Reserved