CFD Online - Computational Fluid Dynamics

CFD Online > Publications by the CSIRO Minerals Fluid Modelling Group > List of Publications: 1996

Go to Author Index

Go to Topic Index

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

1996

1995

1994

1993

1992

1991

1990


List of Publications: 1996

Mathematical modelling of erosion in a three dimensional fluidized bed
DD Achim, AK Easton, JH Perry, MP Schwarz
In Proceedings of the 2nd Australian Engineering Mathematics Conference 96, 1996
Erosion Modelling in a Fluidised Bed Combustor
DD Achim, AK Easton, JH Perry, MP Schwarz
Proceedings of the 3rd CFX International Users Conference, (AEA Technology), pp. 165-169, 1996
Mathematical Modelling of Erosion in a Three Dimensional Fluidised Bed
DD Achim, AK Easton, JH Perry, MP Schwarz
Proceedings of the 2nd Biennial Australian Engineering Mathematics Conference, (University of Sydney), pp. 281-286, 1996
Numerical studies of multiphase mixing with application to some small-scale experiments
DF Fletcher, PJ Witt
Nuclear Engineering and Design, 166(2), 135-145, 1996
Abstract (external link) | Full Paper (external link)
Reynolds Stress, Mean Velocity, and Dynamic Static Pressure Measurement by a Four-Hole Pressure Probe
JD Hooper, ARd Musgrove
Experimental Thermal and Fluid Science, 15 (4), pp. 375-383, 1996
Abstract (external link) | Full Paper (external link)
Fluid flow and natural dilution in open-type thickener feedwells
RMM Johnston, TV Nguyen, MP Schwarz, K Simic
Fourth International Alumina Quality Workshop, Australia
Development of a Combustion Model for a Zinc Flash Smelter
PTL Koh, TV Nguyen, FRA Jorgensen
proceedings of the Third CFX International Users Conference, Chesham, Buckinghamshire, UK, October - November 1996, p. 159-166
CFD Modelling of a Waste Heat Recovery Boiler
M Meyyappan, MP Schwarz, JH Perry
Proceedings of the 3rd CFX International Users Conference, (AEA Technology), pp. 91-100, 1996
CFD Modelling of Waste Heat Recovery Boilers
M Meyyappan, MP Schwarz, JH Perry
Proceedings of the 6th Heat and Mass Transfer Conference, (Uni of New South Wales), 1996
Application of chaos theory to gas injection
LJ Mittoni, MP Schwarz
In M. Nilmani and T. Lehner, editors, The Howard Worner International Symposium on Injection in Metallurgy, pages 251-264. TMS (Warrandale, PA), 1996
Numerical Simulation of Gas Stirring in Pachuca Tanks
MP Schwarz, LJ Mittoni, R Downie, M Welsh
Proceedings of the 3rd CFX International Users Conference, (AEA Technology), pp. 178-179, 1996
A robust probe to measure the movement of particles and gas in a high temperature abrasive environment
IC Shepherd, RF LaFontaine, J Hooper, JL Davey, DR Burton, CJ Beeby,
4th International Alumina Quality Workshop, (June 1996: Darwin, N.T.), 173-182
Heat Transfer and Pressure Drop Considerations in the Design of Sirosmelt Lances
CB Solnordal, NB Gray
Metallurgical and Material Transactions B, Vol. 27B, April 1996, pp. 221-230, 1996
Abstract
The Heat Transfer Conditions on the Outside of a Sirosmelt Lance
CB Solnordal, FRA Jorgensen, RN Taylor
in The Howard Worner Symposium on Injection in Pyrometallurgy, M Nilmani and T Lehner (Eds.) TMS, pp 207-220, 1996
Two dimensional modelling of multiphase flows in fluidized beds
RA Spencer, PJ Witt, AK Easton, MP Schwarz
In Proceedings of the 2nd Australian Engineering Mathematics Conference 96, 1996
The characterisation of dense-phase fluidisation using capacitance topographic imaging
RB White
5th International Conference on CFB, Preprints , (May 1928-June 1996: Beijing, China). 6 p
Observing dense phase fluidisation using capacitance tomographic imaging
RB White
Chemeca 96, (September 1930-October 1996: Sydney, NSW), 51-56
CFD Modelling of Fluidized Bed Systems
PJ Witt, JH Perry, MP Schwarz
Proceedings of the 3rd CFX International Users Conference, (AEA Technology), pp. 115-116, 1996
 

 

Copyright © 2001-2015 CSIRO , All Rights Reserved