CFD Online - Computational Fluid Dynamics

CFD Online > Publications by the CSIRO Minerals Fluid Modelling Group > List of Publications: 1998

Go to Author Index

Go to Topic Index

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

1996

1995

1994

1993

1992

1991

1990


List of Publications: 1998

Mathematical Modelling Tools for the Optimization of Direct Smelting Processes
MP Davis, K Pericleous, M Cross, MP Schwarz
Applied Mathematical Modelling, Vol. 22 (11), pp. 921-940 (1998)
Abstract (external link) | Full Paper (external link)
Improving Thickener Performance at Pasminco Hobart Smelter
RMM Johnston, MP Schwarz, M Newman, M Kershaw, JB Farrow, K Simic,
Lead & Zinc Processing Symposium, Canadian Institute of Mining, Metallurgy and Petroleum, Calgary, pp. 697-713,1998
Numerical Modelling of Combustion in a Zinc Flash Smelter
PTL Koh, TV Nguyen, FRA Jorgensen
Applied Mathematical Modelling, 22(11), 1998, pp. 941-948
Abstract (external link) | Full Paper (external link)
CFD Simulation of Flow in Mechanically Stirred Tanks with Fluidfoil Impellers
PTL Koh, J Wu
Chemeca 98, 26th Australasian Chemical Engineering Conference, Port Douglas, September 1998, 7 pp
CFD Modelling of Waste Heat Recovery Boiler
M Manickam, MP Schwarz, JH Perry
Applied Mathematical Modelling, Vol. 22 (10), pp. 823-840 (1998)
Abstract (external link) | Full Paper (external link)
Steam cavity Collapse and Erosion in a Non-Newtonian Slurry Hydroheater
LJ Mittoni, MP Schwarz
13th Australasian Fluid Mechanics Conference, pages 317-320. Monash University, 1998
Computational Fluid Dynamics as a Tool in the Minerals processing and Metal Production Industries
LJ Mittoni, MP Schwarz
13th Australasian Fluid Mechanics Conference, pages 671-674. Monash University, 1998
Industry/Research Collaboration - improved cyclone design
LJ Mittoni, MCJ Hodgson, MP Schwarz
CHEMECA 98: Proceedings of the Australasian Chemical Engineering Conference, Port Douglas, Sept 28-30, 1998
CFD Modelling of Hydrodynamic Conditions Within the Wake of Mixing Impeller Blades
GD Rigby, GL Lane, GM Evans
International Conference on Mixing and Crystallization, 2225 April, 1998, Tioman Island, Malaysia
CFD and Physical Modelling of Slag-Metal Contacting in a Smelter
MP Schwarz, IF Taylor
4th World Conference on Applied Fluid Mechanics, Freiburg, pp. 4:1-4:15, 1998
'Modelling the Heat Flow to an Operating Sirosmelt Lance
CB Solnordal, FRA Jorgensen, RN Taylor
Metallurgical and Materials Transactions B, Vol. 29B, No. 2, April 1998, pp. 485-492, 1998
Abstract (external link) | Full Paper (avail. for purchase)
Evaluation of Nickel Flash Smelting Through Piloting and Simulation
SR Varnas, N Kemori, PTL Koh
Metallurgical and Materials Transaction B, 29B (1998) 1329-1343
Abstract (external link) | Full Paper (avail. for purchase)
Lateral mixing in a 1.56m. diameter cold fluid bed mode
RB White, A Zakhari
Fluidisation 9, (1998: Colorado), 349-356
Physical and Numerical Modelling of the Distributor system in a fluidized bed calciner
RB White, PJ Witt, A Zakhari, M Manickam, R Close, MP Schwarz,
Proceedings of CHEMECA 98, The 26th Australasian Chemical Engineering Conference, Port Douglas, Sept 1998
Numerical Magnetohydrodynamic Modelling of a Conducting Fluid in a Rectangular Duct
PJ Witt, MP Schwarz
13th Australasian Fluid Mechanics Conference, pages 1001-1004. Monash University, 1998
A Numerical Model for Predicting Bubble Formation in a 3D Fluidized Bed
PJ Witt, JH Perry, MP Schwarz
Applied Mathematical Modelling, Vol. 22 (12), pp. 1071-1080 (1998)
Abstract (external link) | Full Paper (external link)
 

 

Copyright © 2001-2015 CSIRO , All Rights Reserved