CFD Online - Computational Fluid Dynamics

CFD Online > Publications by the CSIRO Minerals Fluid Modelling Group > List of Publications: Robert White

Go to Index by Year

Go to Topic Index

Ken Carey

Yuqing Feng

Alex Heath

Peter Koh

Benny Kuan

Graeme Lane

Martin Leahy

Tom Liu

Tuan Nguyen

Jonian Nikolov

Phil Schwarz

Chris Solnordal

Robert White

Peter Witt

William Yang


List of Publications: Robert White

Modelling studies of fluid flow in a thickener feedwell model
RB White, ID Sutalo, TV Nguyen
Minerals Engineering, Vol. 16, Issue 2, 145-150, 2003
Abstract (external link) | Full Paper (external link)
An Investigation of Sparged Mixing Tanks Using Electrical Impedence Tomography and Computational Fluid Dynamics
RB White, C Doblin
Proceedings of the Third International Conference on CFD in the Minerals and Process Industries, CSIRO, 10-12 December, Melbourne, Australia, pp. 593-598, 2003
Full Paper
Modelling studies of fluid flow in a thickener feedwell model
TV Nguyen, RB White, ID Sutalo
Solid-Liquid Separation Conference, Falmouth, England, June 2002
Using Electrical Capacitance Tomography to monitor gas voids in a packed bed of solids
RB White
Meas. Sci. Technol., 13, pp 1842 ű1847, 2002
Experimental and Numerical Investigations of the Fluid Flow in Thickener Feedwells
ID Sutalo, TV Nguyen, RB White, M Rudman
6th World Congress of Chemical Engineering, Melbourne, 23-27 September, 2001
Comparison of Physical and Numerical Modeling of Solids Movement Near the Distributor in a Fluidised Bed Calciner
M Manickam, PJ Witt, RB White, A Zakhari
Proceedings of the Second International Conference on CFD in the Minerals and Process Industries, CSIRO, 6-8 December, Melbourne, Australia, pp. 101-106, 1999
Full Paper
Characterisation of flow regimes in the base of a CFB riser
RB White, A Zakhari
CFB6, (1999, Germany)
Internal structures in fluid beds of different scales: An application of electrical capacitance tomography
RB White, A Zakhari
1st World Congress on Industrial Process Tomography, (1999, Buxton, UK), 39 ű 46
Physical and Numerical Modelling of Solids movement near the Distributor in a Fluidised Bed Calciner
RB White, PJ Witt, A Zakhari, M Manickam
Proceedings of the 6th International Conference on Circulating Fluidized Beds, CFB-6, 22 - 27 August, 1999, W’rzburg, Germany, (Editor J. Werther), 225-230
Lateral mixing in a 1.56m. diameter cold fluid bed mode
RB White, A Zakhari
Fluidisation 9, (1998: Colorado), 349-356
Physical and Numerical Modelling of the Distributor system in a fluidized bed calciner
RB White, PJ Witt, A Zakhari, M Manickam, R Close, MP Schwarz,
Proceedings of CHEMECA 98, The 26th Australasian Chemical Engineering Conference, Port Douglas, Sept 1998
Applications of Computational Fluid Dynamics in the Development of Technologies for Coal Utilisation
MP Schwarz, PJ Witt, JH Perry, RB White, A Manzoori
Proceedings of Seventh Japan/Australian Joint Technical Meeting, University of Newcastle, 27-28 May, 1997
Physical and Numerical Modelling of the Distributor System in a Fluidised Bed Calciner
RB White, PJ Witt, A Zakhari, M Manickam, R Close, MP Schwarz,
The 1997 Australian Symposium on Combustion and The Fifth Australian Flame Days, Sydney, Australia, 1997
A robust probe to measure the movement of particles and gas in a high temperature abrasive environment
IC Shepherd, RF LaFontaine, J Hooper, JL Davey, DR Burton, CJ Beeby,
4th International Alumina Quality Workshop, (June 1996: Darwin, N.T.), 173-182
The characterisation of dense-phase fluidisation using capacitance topographic imaging
RB White
5th International Conference on CFB, Preprints , (May 1928-June 1996: Beijing, China). 6 p
Observing dense phase fluidisation using capacitance tomographic imaging
RB White
Chemeca 96, (September 1930-October 1996: Sydney, NSW), 51-56
The effect of CFB scale-up on gas-solid contact efficiency
RJ Dry, RB White, RC Close, T Joyce
8th Fluidization Conference, (May 1995: France)
Correlation of solids circulation rate in circulating fluidized bed systems
RJ Dry, RB White, T Joyce
4th International Conference on Fluidized Beds, Editor.A. Avidan, New Jersey, pp. 621-627, 1994
The effect of gas inlet geometry on gas-solid contact efficiency in a circulating fluidized bed
RJ Dry, RB White, RC Close
In Fluidization VII, (May 1992: Gold Coast, Qld), 211-218
 

 

Copyright © 2001-2015 CSIRO , All Rights Reserved