List of Publications
for Phil Schwarz 1990-2006 |
Find out more about Phil here or from
Researcher ID here |
Search CSIRO's
Research Publication Repository for more recent publications |
 |
| An air sparging CFD model for heap bioleaching of chalcocite |
MJ Leahy, MP Schwarz, MR Davidson |
Applied Mathematical Modelling, 30(11), November 2006, pp. 1428-1444 |
Abstract (external link) | Full Paper (external link) |
 |
| Measurement and CFD Simulation of Two-Phase Flow in Solvent Extraction Pulsed Column |
JM Bujalski, W Yang, J Nikolov, CB Solnordal, MP Schwarz |
Chemical Engineering Science, Vol. 61(9), pp. 2930-2938, 2006 |
Abstract (external link) | Full Paper (external link) |
 |
| CFD-based multiscale modelling of bubble-particle collision rates and efficiencies in a flotation cell |
TY Liu, PTL Koh, MP Schwarz |
in Proceedings of CHEMECA 05, Brisbane, Australia, 25-28 September, 2005 |
Abstract |
 |
| A model for heap bioleaching of chalcocite with heat balance: bacterial temperature dependence |
MJ Leahy, MR Davidson, MP Schwarz |
Biohydrometallurgy 05, Cape Town, South Africa, 13-16, March (2005) |
Abstract | Full Paper (external link) |
 |
| Liquid dispersion in model porous media û Comparison of experimental results with computational fluid dynamic modelling |
JM Bujalski, J Johnson, MP Schwarz, H Watling |
Bio&Hydrometallurgy (Cape Town, March 2005) |
|
 |
| Multiscale Modelling of Bubbly Systems Using Wavelet-Based Mesh Adaptation |
T Liu, MP Schwarz |
Computational Science û ICCS 2005: 5th International Conference, Atlanta, GA, USA, May 22-25, 2005, Proceedings, Part III Editors:á Vaidy S. Sunderam, Geert Dick van Albada, Peter M. A. Sloot, et al. p.á112 |
Draft Paper |
 |
| CFD modelling of bubble-particle attachments in a flotation cell |
PTL Koh, MP Schwarz |
Centenary of Flotation Symposium, June 2005, AusIMM |
Abstract | Draft Paper |
 |
| Hydrodynamic Modelling of Hydrometallurgical Unit Operations |
MP Schwarz |
Computational Analysis in Hydrometallurgy, 44th Annual Conference of Metallurgists, Can Instit. Of Mining, Metallurgy and Petroleum, Eds. D. Dixon and M Dry, pp. 3-14 |
Abstract |
 |
| A two-dimensional CFD model for heap bioleaching of chalcocite |
MJ Leahy, MR Davidson, MP Schwarz |
ANZIAMáJ. 46(E) ppC439--C457, 2005 |
|
 |
| Numerical Modelling of Gas-Liquid Flow in Stirred Tanks |
GL Lane, MP Schwarz, GM Evans |
Chemical Engineering Science, Vol 60(8-9), pp. 2203-2214, 2005 |
Abstract (external link) | Full Paper (external link) |
 |
| Numerical Modelling of Gas-Liquid Flow in Stirred Tanks |
GL Lane, MP Schwarz, MP Evans |
ISMIP-5 (5th International Symposium on Mixing in Industrial Processes), Seville, 2004 |
|
 |
| A Two-Dimensional CFD Model for Heap Bioleaching of Chalcocite |
MJ Leahy, MR Davidson, MP Schwarz |
12th Biennial Computational Techniques and Applications Conference (CTAC 2004), Melbourne, Australia, 27 September - 1 October, 2004 |
|
 |
| A Column Bioleaching Model for Chalcocite: An Investigation of Oxygen Limitation and Bacterial Inoculation on Leaching |
MJ Leahy, MR Davidson, MP Schwarz |
BAC-MIN 2004, Bendigo Australia, 8-10 November 2004, AusIMM |
Abstract | Draft Paper |
 |
| Critical condition for slag droplet entrainment in liquid metal û a study on liquid silver and borate melts at 1000 oC |
S Sun, M Lam, MP Schwarz |
Metal Separation Technologies III, Copper Mountain, Colorado, June 20-24, 2004, Ed. R E Aune and M Kekkonen, Helsinki University of Technology, 2004, pp.227-232 |
|
 |
| CFD Modelling of Collisions and Attachments in a Flotation Cell |
PTL Koh, MP Schwarz |
in Flotation 2003, Helsinki, Finland, March 2003, pp. 4. Also published in Minerals Engineering, 16(11), November 2003, pp. 1043-1236. |
Abstract | Full Paper (external link) |
 |
| The Role of CFD Modeling in Development of the HIsmelt Process |
M Davis, R Dry, MP Schwarz |
ISS Tech, Proceedings of the Process Technology Conference of the Iron and Steel Society, Indianapolis, April 2003 |
Abstract | Full Paper (external link) |
 |
| CFD Simulation of single-phase and dilute particulate flows in 90— duct bends |
BT Kuan, MP Schwarz |
Proceedings of FEDSMÆ03: 4th ASME_JSME Joint Fluids Engineering Conference, FEDSM2003-45687, Honolulu, USA |
Abstract | Full Paper (avail. for purchase) |
 |
| Energy Efficient Technologies for Fine and Ultrafine Grinding |
M Gao, GL Lane, MP Schwarz, R Holmes |
Bulletin of the Aus IMM, No 4 (July/August), pp. 36-40, 2003 |
|
 |
| Development of Improved Methods for Computational Modelling of Gas Dispersion in Stirred Tanks |
GL Lane, MP Schwarz, MP Evans |
Proceedings of the Third International Conference on CFD in the Minerals and Process Industries, CSIRO, 10-12 December, Melbourne, Australia, pp. 281-286, 2003 |
Full Paper |
 |
| Development of Models of Mineral Flotation Cells |
PTL Koh, MP Schwarz, YG Zhu, P Bourke, R Peaker, JP Franzidis |
Proceedings of the Third International Conference on CFD in the Minerals and Process Industries, CSIRO, 10-12 December, Melbourne, Australia, pp. 171-176, 2003 |
Full Paper |
 |
| An Air Sparging CFD Model for Heap Bioleaching of Copper-Sulphide |
MJ Leahy, MP Schwarz, MR Davidson |
Proceedings of the Third International Conference on CFD in the Minerals and Process Industries, CSIRO, 10-12 December, Melbourne, Australia, pp. 581-586, 2003 |
Full Paper |
 |
| Numerical Prediction of Dilute Particulate Flows in Horizontal and Vertical Ducts |
B Kuan, MP Schwarz |
Proceedings of the Third International Conference on CFD in the Minerals and Process Industries, CSIRO, 10-12 December, Melbourne, Australia, pp. 135-140, 2003 |
Full Paper |
 |
| CFD Modelling and Comparison with Experimental Residence Time Distributions in Single and Two-Phase Porous Flows |
JM Bujalski, RE Tiller-Jeffery, HR Watling, MP Schwarz |
Proceedings of the Third International Conference on CFD in the Minerals and Process Industries, CSIRO, 10-12 December, Melbourne, Australia, pp. 463-468, 2003 |
Full Paper |
 |
| Flow Simulation in the HIsmelt Process |
MP Davis, RJ Dry, MP Schwarz |
Proceedings of the Third International Conference on CFD in the Minerals and Process Industries, CSIRO, 10-12 December, Melbourne, Australia, pp. 305-312, 2003 |
Full Paper |
 |
| Tube erosion modelling in a fluidised bed |
D Achim, AK Easton, MP Schwarz, PJ Witt, A Zakhari |
Appl. Math. Modelling. Vol 26, No 2, pp. 191-201, 2002 |
Abstract (external link) | Full Paper (external link) |
 |
| CFD modelling of thickeners at Worsley Alumina Pty Ltd |
R Kahane, TV Nguyen, MP Schwarz |
Appl. Math. Modelling. Vol 26, No 2, pp. 281-296, 2002 |
Abstract (external link) | Full Paper (external link) |
 |
| Predicting gas-liquid flow in a mechanically stirred tank |
GL Lane, MP Schwarz, GM Evans |
Appl. Math. Modelling. Vol 26, No 2, pp.223-235, 2002 |
Abstract (external link) | Full Paper (external link) |
 |
| Modelling and comparison of solids RTDs from CFB and other processes |
KS Lim, JPK Peeler, MP Schwarz |
7th International Conference on Circulating Fluidized Beds, Niagara Falls, Canada, May 5-8, 2002 |
|
 |
| CFD Modelling of Solids Maldistribution in Mill-Duct Flows |
M Manickam, MP Schwarz, MJ Macintosh |
Proc.7th International Conference on Bulk Materials Storage, Handling and Transportation, Ed M Jones, Uni of Newcastle: Institution of Engineers Australia, pp. 833-840, 2001 |
|
 |
| Computational Modelling of Metals Reduction Processes |
MP Schwarz |
Computational Modelling of Materials, Minerals and Metals Processing, TMS (Warrandale), pp. 24-40, 2001 |
Abstract (external link) | Full Paper (avail. for purchase) |
 |
| Solids Addition to Metallurgical Melts: A Computational Study |
JW Holbeach, MR Davidson, DE Langberg, MP Schwarz |
6th World Congress of Chemical Engineering, Melbourne, 23-27 September, 2001 |
|
 |
| Comparison of Solids Residence Time Distributions |
KS Lim, JPK Peeler, MP Schwarz |
6th World Congress of Chemical Engineering, Melbourne, 23-27 September, 2001 |
|
 |
| CFD Simulation of a Mineral Flotation Cell |
PTL Koh, M Manickam, MP Schwarz |
Flotation 2000, Adelaide, March 2000, p. 20-23 |
|
 |
| CFD Simulation Of Bubble- Particle Collisions In Mineral Flotation Cells |
PTL Koh, M Manickam, MP Schwarz |
Minerals Engineering, 13 (2000) no. 14/15, pp. 1455-1463 |
Abstract (external link) | Full Paper (external link) |
 |
| Modelling of the Interaction between Gas and Liquid in Stirred Vessels |
GL Lane, MP Schwarz, GM Evans |
Proceedings of the 10th European Conference on Mixing, 2û5 July, 2000, Delft, The Netherlands, Delft University of Technology, pp. 197û204 |
|
 |
| Comparison of CFD Methods for Modelling of Stirred Tanks |
GL Lane, MP Schwarz, GM Evans |
Proceedings of the 10th European Conference on Mixing, 2û5 July, 2000, Delft, The Netherlands, Delft University of Technology, pp.á273û280 |
|
 |
| Mathematical Modelling of Injection Proceses |
MP Schwarz, IF Taylor |
The Brimacombe Memorial Symposium, Vancouver, Oct 1-4, 2000, Can Instit Mining, Metallurgy and Petroleum (Montreal) |
|
 |
| CFD Modelling of Gas-Liquid Flow in a Stirred Tank |
GL Lane, MP Schwarz, GM Evans |
Chemeca Æ99, The 27th Australasian Chemical Engineering Conference, 26û29 September 1999, Newcastle, Australia, The Institution of Engineers, Australia |
|
 |
| Erosion Modelling in a Fluidised Bed |
D Achim, AE Easton, MP Schwarz, PJ Witt, A Zakhari |
Circulating Fluidised Bed Technology VI, Proceedings of 6th International Conference on Circulating Fluidized Beds, Wurzburg, Germany, pp.959-964, 1999 |
|
 |
| Computational and Experimental Studies of Tube Erosion in a Fluidised Bed |
D Achim, AE Easton, MP Schwarz, PJ Witt, A Zakhari |
Proceedings of the Second International Conference on CFD in the Minerals and Process Industries, CSIRO, 6-8 December, Melbourne, Australia, pp. 89-94, 1999 |
|
 |
| CFD Simulation of Gas-Liquid Flow in a Stirred Tank |
GL Lane, MP Schwarz, G Evans |
3rd Inter Symposium on Mixing in Industrial Processes, Osaka, Japan, pp. 21-28, 1999 |
|
 |
| Predicting Gas-Liquid Flow in a Mechanically Stirred Tank |
GL Lane, MP Schwarz, G Evans |
Proceedings of the Second International Conference on CFD in the Minerals and Process Industries, CSIRO, 6-8 December, Melbourne, Australia, pp. 357-362, 1999 |
Full Paper |
 |
| CFD Modelling of Gas-Liquid Flow in a Stirred Tank |
GL Lane, MP Schwarz, G Evans |
Chemeca Æ99, The 27th Australasian Chemical Engineering Conference, 26û29 September 1999, Newcastle, Australia, The Institution of Engineers, Australia |
|
 |
| CFD Analysis of Erosive Bifurcation Duct Walls |
M Manickam, MP Schwarz, M Macintosh |
Proceedings of the Second International Conference on CFD in the Minerals and Process Industries, CSIRO, 6-8 December, Melbourne, Australia, pp. 243-248, 1999 |
Full Paper |
 |
| Advanced Process Design and Optimisation Technologies for Minerals, manufacturing and Process Industries |
LJ Mittoni, MP Schwarz |
CHEMECA 99: Proceedings of the Australasian Chemical Engineering Conference, Newcastle, Sept, 1999 |
|
 |
| Simulation of Impinging Jet Apparatus for Gas-Liquid Reaction Rate Measurement |
MP Schwarz |
In Fluid Flow Phenomena in Metals Processing, N. El-Kaddah et al (Eds). TMS (Warrendale), pp171-178, 1999 |
|
 |
| Application of CFD to Industrial fluidised bed processes |
PJ Witt, LJ Mittoni, MP Schwarz |
Circulating Fluidised Bed Technology VI, Proceedings of 6th International Conference on Circulating Fluidized Beds, Wurzburg, Germany, pp. 211-212, 1999 |
|
 |
| CFD Modelling Magnetohydrodynamics Flows |
PJ Witt, MP Schwarz |
Proceedings 5th CFX International Users Conference, Friedrichshafen, Germany, 21-24 June, 1999 |
|
 |
| Mathematical Modelling Tools for the Optimization of Direct Smelting Processes |
MP Davis, K Pericleous, M Cross, MP Schwarz |
Applied Mathematical Modelling, Vol. 22 (11), pp. 921-940 (1998) |
Abstract (external link) | Full Paper (external link) |
 |
| Improving Thickener Performance at Pasminco Hobart Smelter |
RMM Johnston, MP Schwarz, M Newman, M Kershaw, JB Farrow, K Simic, |
Lead & Zinc Processing Symposium, Canadian Institute of Mining, Metallurgy and Petroleum, Calgary, pp. 697-713,1998 |
|
 |
| CFD Modelling of Waste Heat Recovery Boiler |
M Manickam, MP Schwarz, JH Perry |
Applied Mathematical Modelling, Vol. 22 (10), pp. 823-840 (1998) |
Abstract (external link) | Full Paper (external link) |
 |
| Steam cavity Collapse and Erosion in a Non-Newtonian Slurry Hydroheater |
LJ Mittoni, MP Schwarz |
13th Australasian Fluid Mechanics Conference, pages 317-320. Monash University, 1998 |
|
 |
| Computational Fluid Dynamics as a Tool in the Minerals processing and Metal Production Industries |
LJ Mittoni, MP Schwarz |
13th Australasian Fluid Mechanics Conference, pages 671-674. Monash University, 1998 |
|
 |
| Industry/Research Collaboration - improved cyclone design |
LJ Mittoni, MCJ Hodgson, MP Schwarz |
CHEMECA 98: Proceedings of the Australasian Chemical Engineering Conference, Port Douglas, Sept 28-30, 1998 |
|
 |
| CFD and Physical Modelling of Slag-Metal Contacting in a Smelter |
MP Schwarz, IF Taylor |
4th World Conference on Applied Fluid Mechanics, Freiburg, pp. 4:1-4:15, 1998 |
|
 |
| Physical and Numerical Modelling of the Distributor system in a fluidized bed calciner |
RB White, PJ Witt, A Zakhari, M Manickam, R Close, MP Schwarz, |
Proceedings of CHEMECA 98, The 26th Australasian Chemical Engineering Conference, Port Douglas, Sept 1998 |
|
 |
| Numerical Magnetohydrodynamic Modelling of a Conducting Fluid in a Rectangular Duct |
PJ Witt, MP Schwarz |
13th Australasian Fluid Mechanics Conference, pages 1001-1004. Monash University, 1998 |
|
 |
| A Numerical Model for Predicting Bubble Formation in a 3D Fluidized Bed |
PJ Witt, JH Perry, MP Schwarz |
Applied Mathematical Modelling, Vol. 22 (12), pp. 1071-1080 (1998) |
Abstract (external link) | Full Paper (external link) |
 |
| Modelling of Swirl Jet Flows |
M Meyyappan, MP Schwarz, JH Perry |
Proceedings of the International Conference on CFD in Minerals and Metals Processing and Power Generation, CSIRO Minerals, pp 177-188, 1997 |
Full Paper |
 |
| Comparison of Representations for Particle-Particle Interactions in a Gas-Solid Fluidized Bed |
RA Bell, PJ Witt, AK Easton, MP Schwarz |
Proceedings of the International Conference on CFD in Minerals and Metals Processing and Power Generation, CSIRO Minerals, pp 360-368, 1997 |
Full Paper |
 |
| Mathematical Modelling Tools for the Optimization of Direct Smelting Processes |
MP Davis, K Pericleous, MP Schwarz, M Cross |
Proceedings of the International Conference on CFD in Minerals and Metals Processing and Power Generation, CSIRO Minerals, pp 25-40, 1997 |
Full Paper |
 |
| Residue Thickener Modelling at Worsley Alumina |
RB Kahane, MP Schwarz, RMM Johnston |
Proceedings of the International Conference on CFD in Minerals and Metals Processing and Power Generation, CSIRO Minerals, pp 109-118, 1997 |
Full Paper |
 |
| Proceedings of the First International Conference on CFD in Minerals and Metals Processing and Power Generation |
MP Schwarz, MR Davidson, AK Easton (Editors) |
Melbourne, CSIRO Minerals, (1997) |
Full Paper |
 |
| Applications of Computational Fluid Dynamics in the Development of Technologies for Coal Utilisation |
MP Schwarz, PJ Witt, JH Perry, RB White, A Manzoori |
Proceedings of Seventh Japan/Australian Joint Technical Meeting, University of Newcastle, 27-28 May, 1997 |
|
 |
| A Hydrodynamic Model of Gas-Particle flow in a lean Circulating Fluidized Bed Combustor Riser |
D Shoesmith, PJ Witt, MP Schwarz |
Proceedings of the Australian Combustion Institute: Flamedays 97, pp. 189-193, 1997 |
|
 |
| Physical and Numerical Modelling of the Distributor System in a Fluidised Bed Calciner |
RB White, PJ Witt, A Zakhari, M Manickam, R Close, MP Schwarz, |
The 1997 Australian Symposium on Combustion and The Fifth Australian Flame Days, Sydney, Australia, 1997 |
|
 |
| Application of CFD to Fluidized Bed Systems |
PJ Witt, JH Perry, MP Schwarz |
Proceedings of the International Conference on CFD in Minerals and Metals Processing and Power Generation, CSIRO Minerals, pp 353-360, 1997 |
Full Paper |
 |
| Mathematical modelling of erosion in a three dimensional fluidized bed |
DD Achim, AK Easton, JH Perry, MP Schwarz |
In Proceedings of the 2nd Australian Engineering Mathematics Conference 96, 1996 |
|
 |
| Erosion Modelling in a Fluidised Bed Combustor |
DD Achim, AK Easton, JH Perry, MP Schwarz |
Proceedings of the 3rd CFX International Users Conference, (AEA Technology), pp. 165-169, 1996 |
|
 |
| Mathematical Modelling of Erosion in a Three Dimensional Fluidised Bed |
DD Achim, AK Easton, JH Perry, MP Schwarz |
Proceedings of the 2nd Biennial Australian Engineering Mathematics Conference, (University of Sydney), pp. 281-286, 1996 |
|
 |
| Fluid flow and natural dilution in open-type thickener feedwells |
RMM Johnston, TV Nguyen, MP Schwarz, K Simic |
Fourth International Alumina Quality Workshop, Australia |
|
 |
| CFD Modelling of a Waste Heat Recovery Boiler |
M Meyyappan, MP Schwarz, JH Perry |
Proceedings of the 3rd CFX International Users Conference, (AEA Technology), pp. 91-100, 1996 |
|
 |
| CFD Modelling of Waste Heat Recovery Boilers |
M Meyyappan, MP Schwarz, JH Perry |
Proceedings of the 6th Heat and Mass Transfer Conference, (Uni of New South Wales), 1996 |
|
 |
| Application of chaos theory to gas injection |
LJ Mittoni, MP Schwarz |
In M. Nilmani and T. Lehner, editors, The Howard Worner International Symposium on Injection in Metallurgy, pages 251-264. TMS (Warrandale, PA), 1996 |
|
 |
| Numerical Simulation of Gas Stirring in Pachuca Tanks |
MP Schwarz, LJ Mittoni, R Downie, M Welsh |
Proceedings of the 3rd CFX International Users Conference, (AEA Technology), pp. 178-179, 1996 |
|
 |
| Two dimensional modelling of multiphase flows in fluidized beds |
RA Spencer, PJ Witt, AK Easton, MP Schwarz |
In Proceedings of the 2nd Australian Engineering Mathematics Conference 96, 1996 |
|
 |
| CFD Modelling of Fluidized Bed Systems |
PJ Witt, JH Perry, MP Schwarz |
Proceedings of the 3rd CFX International Users Conference, (AEA Technology), pp. 115-116, 1996 |
|
 |
| Mathematical modelling of erosion in a fluidized bed |
DD Achim, AK Easton, JH Perry, MP Schwarz |
In Proceedings of the 12th Australasian Fluid Mechanics Conference, 1995 |
|
 |
| Splash and Free Surface Flow in Metallurgical Processes |
J-L Liow, MP Schwarz (Editors) |
GKW CRC for Extractive Metallurgy, Melbourne University June,1995 |
|
 |
| Deterministic chaos in the gas inlet pressure of gas-liquid bubbling system |
LJ Mittoni, MP Schwarz, RD La Nauze |
Phys. Fluids, 7(4):891-893, 1995 |
Abstract (external link) | Full Paper (avail. for purchase) |
 |
| Simulation of gas injection into liquid melts |
MP Schwarz |
Applied Math. Modell., 20(1), 41-51, 1995 |
Abstract (external link) | Full Paper (external link) |
 |
| Simulation of blowthrough in smelting baths with bottom injection |
MP Schwarz, P Dang |
13th Process Technology Conference Proceedings, pages 415-422. Iron and Steel Society, 1995 |
|
 |
| Monitoring complex metallurgical systems using pattern recognition techniques |
LJ Mittoni, MP Schwarz |
In R. Stonier and X. Yu, editors, Complex Systems, pages 117-124. IOS Press (Amsterdam), 1994 |
|
 |
| The role of computational Fluid dynamics in process modelling |
MP Schwarz |
Proc. of 6th AusIMM Extractive Metallurgy Conference, pages 31-36. Aus.IMM, 1994 |
|
 |
| Simulation of flow and mixing in gas-liquid systems |
MP Schwarz |
In N. Ahmed, editor, The Australian Mixing Conference: Mixing in the Process Industries, pages 22:1-22:4. University of Newcastle, 1994 |
|
 |
| On hydrodynamic simulation of a bubble column |
MP Schwarz |
In N.R. Sheridan, editor, Fifth Australasian Heat and Mass Transfer Conference, pages 34:1-34:6. University of Queensland, 1993 |
|
 |
| Simulation of mixing experiments in cylindrical gas-stirred tanks |
P Dang, MP Schwarz |
In J.A.Reizes, editor, 4th International Symposium on Transport Phenomena in Heat and Mass Transfer, Sydney, pages 1514-1525. Elsevier (Amsterdam), 1992 |
|
 |
| The role of mathematical modelling in the development of the HIsmelt process |
GJ Hardie, M Cross, RJ Batterham, M Davis, MP Schwarz |
In Proc. 10th Process Technology Division Conference, ISS/AIME, pages 109-121, 1992 |
|
 |
| An improved model for wave excitation in liquid baths with gas injection |
MP Schwarz |
In M.R. Davis and G.J. Walker, editors, 11th Australasian Fluid Mechanics Conference, pages 207-210. University of Tasmania, 1992 |
|
 |
| Flow dynamics in smelting baths with gas injection |
MP Schwarz |
In M. Nilmani and W.J. Rankin, editors, Mervyn Willis Symposium and Smelting and Refining Course, pages 33:1-33:14. University of Melbourne, 1992 |
|
 |
| Validation of numerical simulation of gas driven bath circulation by LDV measurements |
MP Schwarz, ARd Musgrove, JD Hooper, P Dang |
In Proc. 10th Process Technology Division Conference, Toronto, ISS/AIME, 1992 |
|
 |
| Flow simulation in minerals engineering |
MP Schwarz |
In B.A. Wills, editor, Minerals Engineering 91, Singapore, Feb 20-22, 1991 |
|
 |
| Simulation of mixing experiments in cylindrical gas-stirred tanks |
P Dang, MP Schwarz |
In G. de Vahl Davis, editor, 4th International Symposium on Transport Phenomena in Heat and Mass Transfer, Sydney, pages 642-653, University of New South Wales, 1991 |
|
 |
| Buoyancy and expansion power in gas-agitated baths |
MP Schwarz |
ISIJ International, 31(9):947-951, 1991 |
Abstract (external link) | Full Paper (external link) |
 |
| Excitation of wave motion in liquid baths by gas injection |
MP Schwarz |
In G. Matsui, A. Serizawa, and Y. Tsuji, editors, Proceedings of the International Conference on Multiphase Flows '91, Vol 2, pages 409-412, 1991 |
|
 |
| Numerical and experimental investigations of wear in heavy medium cyclones |
HD Zughbi, MP Schwarz, WJ Turner, W Hutton |
Minerals Engineering, 4(3/4):245-262, 1991 |
Abstract (external link) |
 |
| Flow simulation in minerals engineering |
MP Schwarz |
Minerals Engineering, 4(7-11):717-732, 1991 |
Abstract (external link) |
 |
| Sloshing waves formed in gas-agitated baths |
MP Schwarz |
Chemical Engineering Science, 45(7):1765-1777, 1990 |
Abstract (external link) |
 |
| Numerical simulation of heavy medium separation cyclones of Argyle Diamond Mines |
HD Zughbi, MP Schwarz, WJ Turner, W Hutton |
In 4th Samancor Symposium on Heavy Medium Cyclones, Cairns, 1990 |
|
 |