| A FILTERED FRICTIONAL-KINETIC MODEL FOR GAS-SOLID FLUIDIZED AND MOVING BEDS |
| Schneiderbauer, S., Schellander, D. and Pirker, S. (Johannes Kepler University, Austria) |
 |
| AN ASSESSMENT OF MECHANISTIC BREAKAGE AND COALESCENCE KERNELS IN POLY-DISPERSED MULTIPHASE FLOW |
| Deju, L., Cheung, S.C.P., Yeoh, G.H. and Tu, J.Y. (RMIT University) |
|
| APPLICATION OF MULTI-SCALE APPROACH IN THE GAS FLOW SIMULATION THROUGH ELECTROSTATIC PRECIPITATORS |
| Guo, B.Y., Ye, X.L., Liu, D.D. and Yu, A.B. (UNSW) |
|
| CFD MODELLING OF THE AERODYNAMICS IN A SOLAR - ENHANCED VORTEX GASIFIER (SVG) - PART II. A PRELIMINARY STUDY OF THE LOCATIONS OF SEAL GAS INLETS |
| Yu, J., Cao, Y., Tian, Z.F., Xue, Y. and Nathan, G.J. (The University of Adelaide) |
|
| CFD MODELLING OF THE AERODYNAMICS IN A SOLAR-ENHANCED VORTEX GASIFIER (SVG) - PART1. VALIDATION CASE |
| Cao, Y., Tian, Z.F. and Nathan, G.J. (The University of Adelaide) |
|
| CFD-DEM INVESTIGATION OF PARTICLE SEPARATIONS USING A TRAPEZOIDAL JIGGING PROFILE |
| Viduka, S., Feng, Y.Q., Hapgood, K. and Schwarz, M.P. (Monash University) |
|
| CFD-DEM STUDY OF THE GAS-SOLIDS FLOWS IN A FLUIDIZED BED WITH AN IMMERSED CYLINDER: COMPARISON OF PSEUDO-2D AND 3D MODELS |
| Wahyudi, H., Chu, K.W. and Yu, A.B. (UNSW) |
|
| COMPARISON OF RESOLVED AND COARSE GRAIN DEM MODELS FOR GAS FLOW THROUGH PARTICLE BEDS |
| Hilton, J.E. and Cleary, P.W. (CSIRO CMIS) |
|
| EFFECT OF ELECTROHYDRODYNAMIC SECONDARY FLOW ON THE PARTICLE COLLECTION IN A WIRE-PLATE ELECTROSTATIC PRECIPITATOR |
| Xing, M., Guo, B.Y. and Yu, A.B. (UNSW) |
|
| EFFECTS OF MICROSCOPIC DRAG CORRELATIONS AND RESTITUTION COEFFICIENT ON THE CHARACTERISTICS OF MESO-SCALE CLUSTERING STRUCTURES IN RISER FLOWS |
| Zhou, Q. and Wang, J. (Institute of Process Engineering, Chinese Academy of Sciences) |
|
| GAS-POWDER FLOW SIMULATION IN AN ESP UNIT WITHOUT ELECTRIC FIELD |
| Guo, B.Y., Yu, A.B., Li, L.F. and Ye, X.L. (UNSW) |
|
| INVESTIGATION OF DROPLET EVAPORATION IN A BUBBLING FLUIDIZED BED
|
| Mitra, S., Sathe, M.J., Doroodchi, E. and Evans, G.M. (University of Newcastle, Australia) |
|
| METHODOLOGY FOR CFD-DEM MODELLING OF PARTICULATE SUSPENSION RHEOLOGY |
| Smuts, E.M., Deglon, D.A. and Meyer, C.J. (University of Cape Town) |
|
| NUMERICAL ANALYSIS OF THE INTERACTION OF PARTICLE FLOWS WITH THE VORTEX DYNAMICS IN A DOUBLE EXPANSION |
| Love, A., Giddings, D. and Power, H. (University of Nottingham) |
|
| PREDICTING SURFACE PROFILE EVOLUTION CAUSED BY SOLID PARTICLE EROSION |
| Solnordal, C.B. and Wong, C.Y. (CSIRO CMIS) |
|
| SIMULATION OF SORPTION ENHANCED STEAM METHANE REFORMING AND CHEMICAL LOOPING REFORMING IN A CIRCULATING FLUIDIZED BED REACTOR |
| Sanchez, R.A. and Jakobsen, H.A. (Norwegian University of Science and Technology) |
|
| SIMULATION STUDY ON THE HYDRODYNAMIC CHARACTERISTICS OF MEMBRANE-ASSISTED MICRO-FLUIDIZED BEDS |
| Tan, L. and van Sint Annaland, M. (Eindhoven University of technology ) |
|
| UPWARD JET PENETRATION IN FLUIDIZED BEDS : CFD PREDICTIONS COMPARED TO EXPERIMENTAL RESULTS |
| Plais, C. (IFPEN) |
|
| USING CFD TO SIMULATE HEAT TRANSFER IN PARTICLE CURTAINS |
| Afshar, S. and Sheehan, M. (James Cook University) |
|
CFD 
